Deep Groove Ball Bearing

Bearing with a riveted stamped steel cage
Filled up with a polyalkylene glycol/ graphite mixture for lubrication
Running-in period necessary to distribute the lubricant within the bearing for applications that stand idle for a long period
Not for wet or perhaps humid environments
Single-row, pre-lubricated, common accuracy.
Deep Groove Ball Bearings are probably the most trusted rolling bearings. They are being used to support radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Metal (GCr15) made out of heat treating, provides large and uniform hardness, great wear resistance, and high contact fatigue performance.
Suitable for all varieties of professional equipment, micro motor, small rotary engine, office equipment and so forth.
Cages – Variety of cage types to fit your application needs: steel, sturdy brass or polymer
High Quality Steel – Ultra clean steel designed to extend bearing life by up to 80%
Advanced Grease Technology – NSK lubricants made to extend grease existence and improve bearing performance
Extremely Finished Raceways – Specially honed to reduce noise and enhance the grease distribution
Patented Seals – Give a barrier to contamination in tough environments.
Electrically insulated ball bearings available
Outer diameters up to 2500 mm
This sort of ball bearing it often the most used because of its versatility. They will be suitable for high speeds and can handle a good radial load ability, all will hardly any maintenance required.
“Deep Groove” refers to the competition (the groove where the balls rest). There is as a result a larger space between your inner and outer bands, than the diameter of the ball. This leaves space for the rubber seals.
The purpose of a ball bearing is to determine the relative position of two parts (usually the shaft and the bearing housing) and also to ensure their free rotation while transmitting the strain between them. At large rotational speeds (for instance in gyro ball bearings), this application can be extended to add free rotation without practically wear in the bearings. To do this, the two parts of the bearing could be separated by a level of adhesive fluid film called an elastic hydrodynamic lubricating film. remarked that flexibility can be maintained not merely when the bearing bears the strain on the shaft, but likewise when the bearing is usually preloaded in order that the positioning reliability and stableness of the shaft will not exceed 1 microin or 1 nanoin. Hydrodynamic lubricating film.
Deep groove ball bearings mainly take radial load, but also can support radial and axial load. When the just radial loads, the speak to angle is zero.
When the deep groove ball bearings with a more substantial radial clearance, with angular speak to bearings can bear significant axial load, deep groove ball bearing friction coefficient is small, the speed limit is also high.

Sole row deep groove ball bearings will be manufactured as available type (unsealed), sealed and shielded, the most used sizes of deep groove ball bearings happen to be also produced in sealed versions with shields or get in touch with seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals possesses contact on the bearings inner and outer, a shielded bearings shield provides get in touch with on the outer simply, and Shielded bearings are primarily meant for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at great speeds.
Double-row Deep Groove Ball Bearing own deep uninterrupted raceways and huge conformity between your balls and raceways.
They could carry axial loads performing in both directions in addition to radial loads.Dual row deep groove ball bearings are
very ideal for bearing arrangements where the load carrying potential of an individual row bearing is inadequate. For the same
external and bore diameters, twice row bearings are somewhat wider than one row bearings but have considerably higher load
carrying capacity than single row bearings in the 62 and 63 series.
EPT deep groove ball bearings for extreme temperatures correspond in design and style to standard sole row deep groove ball bearings of the same size. They have no filling slots and will accommodate ordinary axial loads in addition to radial loads. The radial internal clearance can be a multiple of C5 to avoid the bearings from seizing, even though they cool quickly. All floors of the bearing and shields will be manganese phosphated to enhance adhesion of the lubricant to the steel and provide additional safeguard against corrosion.


Recent Posts