Drive sprocket

A chain and sprocket travel is a kind of power transmission in which a roller chain engages with two or more toothed wheels or sprockets, used in engines as a drivefrom crankshaft to camshaft.
Ever-electricity is proud to inventory a wide collection of Sprockets along with our huge variety of agriculture, gardening, cooking and outdoor items. We stand behind all 26,000 items we sell with our Satisfaction Guarantee. Customer Service may be the cornerstone of our family business, and has been for over 50 years.
Ever-power drive sprockets provide tough, reliable service and feature replaceable tooth plates for convenient field protection. Tooth plates for 102 and 142 series chain are available with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL in addition to the 175 and 260 series use our non-symmetrical profile.
Travel sprockets weren’t always designed to be bolted about. At one time they were welded onto the final drive motor and had to be minimize off when they were replaced. Finally, welded-on adapters were installed that allowed the sprocket to always be bolted on, and newer designs utilize the bolted approach altogether.
When someone sends in your final drive motor for us to check out or?rebuild/reman, we advise them to eliminate the sprocket. We don’t want the sprocket in destination to evaluate the motor and the added weight (and this can be significant) unnecessarily enhances your shipping costs.
Signs of Sprocket Wear
The teeth on a travel sprocket are where you search for wear . They must be tall and toned by the end, not razor-sharp or dished by the end. And the sprocket, and even more specifically its teeth, commence to wear, its diameter becomes smaller sized. This causes what is referred to as a pitch mismatch, where the teeth on the sprocket no longer connect to the track backlinks as effectively. This can accelerate the dress in of the sprocket and reduce the efficiency of your equipment.
If your sprocket shows sign of excessive wear, then its time to displace it before it starts to cause abnormal track wear or starts to negatively affect the performance of your final drive engine.
Preventing Sprocket Wear
Among the key ways to prevent accelerated sprocket have on is to check on the track stress. If the tension is too tight, it’ll cause wear on the sprocket teeth. We’ve talked before about the value of keeping the undercarriage clean, and the health of the undercarriage can affect the track tension (particularly if there is normally a build-up of dried mud and debris). That’s section of the motive we put so much focus on keeping the undercarriage clean
Without a functioning drive sprocket, your track drive won’t manage to propel your equipment. Fortunately, there are methods to help your travel sprocket go longer: keep carefully the track stress at a proper level and retain your undercarriage clean.
The undercarriage of your track equipment ought to be inspected regularly. If you discover early wear or damage to your sprockets tracks, a put on sprocket may be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the following Bobcat Compact Track Loaders: T180, T190, T550, T590
Parts can vary based on your serial number.
All Ever-ability sprocket tooth profiles are induction hardened to 55 Rockwell C., and are replaceable. The replacement and maintenance of tooth plate segments will not require removing of the travel shaft, bearings, etc. Ever-power also designs customized split hub elements for retrofit applications that minimize field labor costs.
At initial glance, you might feel that if you’ve seen one drive sprocket, you’ve seen all of them. However, Ever-electricity possesses added an I.D. lip and spiral band that captivate the needle bearing along with an exterior snap ring that improves performance and stability. While simple to overlook, it’s this attention to detail that the racer features come to anticipate from Ever-power.
An We.D. lip and spiral band that captivate the needle bearing
Exterior snap ring caps sprocket in drum & increases durability
CNC-machined teeth feature a corrosion-resistant finish
Chain Type: #219
Tooth Configuration: Standard


Recent Posts