electric fan motor

Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, taken off unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Designed to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring in the middle of your electric fan motor china electric motor, capacitor and quickness control change is still installed however the cord itself is normally detached as seen in the photos. (Find “Control Notice” below for modify type.)
T (See “Software Notice” below for utilize in various other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” lengthy with a collection screw smooth. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to be on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric powered motor) is Clockwise.

Control Take notice: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). These two types of switches both control the engine just as (but you have a rotating knob and you have a pull-chain). If you order several electric motor at a time, we will do our best to supply your order with each one sort of control or the additional.
Application Note: USUALLY DO NOT use this electric motor in a nonfan app. This is a completely enclosed fan electric motor and made to have continuous ventilation over the motor casing for cooling. The housing isn’t vented and the electrical electric motor will overheat and get into automated thermal overload if run in a nonfan program where there isn’t solid ventilation past the electric motor. (Caution Note: the electrical motor will restart instantly when it cools back off.) Using this electric motor for applications apart from 18 & 24″ TPI fans could also overload the electric motor and cause it to proceed into automatic thermal overload. (Your lover blade from another producer may have a steeper blade angle.)
Origin: This electric engine is manufactured in China.

Tags:

Recent Posts