The EP Greenhouse gear motor is a concise and lightweight reduction gear driver with an integrated limit switch system that’s ideal for assembly of a locally available electric motor. The gear reducer is utilized in manually-controlled or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear driver is certainly rainproof and windproof. The gearbox includes a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise gear motor for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an 
aluminum precision housing. The self-braking worm wheel tranny means that the drive shaft is definitely locked when the decrease gear driver is not running. The completely sealed reduction gearbox comes with an expansion chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all circumstances, even at high temps. Thanks to the use of an growth chamber, the gear reducer can be installed in any position. There are no restrictions, because there is no dependence on a bleed connect. The sealed reduction geared motor keeps the gear essential oil of the geared motor in optimal condition for its entire operating lifetime. The gearbox is suitable for discontinuous use, working class s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction gear reducer has an FT85 motor assembly flange, on to which the right IEC standard motor can easily be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed in an built-in chamber and is certainly enclosed by an impact-resistant plastic-type material cover. The limit change system is obtainable and simple to adjust. The limit switch system’s optimum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear motor comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear motor for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of app of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperature ranges of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 a few minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching selection of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).