micro planetary gear motor

The micro plastic gearmotor’s output shaft works with with our 14 mm wheels. We don’t have any brackets because of this gearmotor, and it generally does not have any mounting holes, but its compact size makes it easy to fasten with tape or glue. On the other hand, since this gearmotor is definitely nearly the same size as a 1/4″ fuse, it could be mounted using regular 1/4″ (6 mm) fuse clips.

Motor accessories

The next diagram shows the micro plastic gearmotor dimensions in mm. The planetary gearbox includes a D-shaped plastic output shaft, which is 2 mm in diameter with a section that is flattened by 0.5 mm. The “D” part of the shaft is Micro Planetary Gear Motor certainly 2.5 mm long. The engine steps 6 mm in diameter and 9 mm in length, and the gearbox duration, labeled “L” in the diagram below, depends upon the apparatus ratio. The 26:1 gearbox can be 7.1 mm long, as the 136:1 option actions 9.4 mm. The electric motor leads include their tips pre-stripped and extend around 2 cm (0.8″) from the trunk of the motor.

Gearmotor dimensions

Since the gearmotor’s output shaft is nylon, there can be small variances in the diameter from unit to unit. These variations may cause press-match attachments like our 14 mm wheel to match loosely in some instances. If you experience a loose fitting, you could attempt swapping tires or using a little dab of glue to greatly help hold the wheel on.

Tags:

Recent Posts