Rope pulley

Hanging Pulleys designed for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Acetal, nylon, and light weight aluminum are lightweight and corrosion resistant. Stainless steel is the most corrosion resistant.
Designs C, D, and J have a bracket on underneath for tying off 1 end of a rope.
Style K decrease the force needed to hold your load in place. Unlike regular pulleys, these possess a V-groove for more hold on your rope, and they ratchet when under load so they won’t slip in the other direction. Pulley for3/8″ dia. rope can be established to ratchet even when not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Mount these pulleys to a set surface to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Aluminum and nylon are lightweight and corrosion resistant. Stainless steel gets the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Acetal and aluminium are light-weight and corrosion resistant. Galvanized steel is more corrosion resistant than iron and metal. Stainless steel may be the most corrosion resistant.
Easy-Open Hanging Pulleys for Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a totally free rope end is not needed. Use them to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Aluminum is more lightweight than stainless steel. Stainless steel is usually more corrosion resistant than light weight aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Acetal and nylon are lightweight and corrosion resistant. Stainless may be the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Install these pulleys to a flat surface to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as for example block and deal with systems. They require about half the drive of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Stainless steel is definitely more corrosion resistant than steel.
Hanging Pulleys intended for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and tackle systems. They require about half the push of a single-groove pulley to move the same load. They have got a bracket on the bottom for tying off one end of your wire rope.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Nylon is lighter in weight than metal. Aluminum can be corrosion resistant. Stainless is the most corrosion resistant.
Pulley with carabiner may mount to metal framing or hang in your rigging system.
Easy-Open up Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a totally free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Style D pulleys have a corrosion-resistant stainless steel housing.
Pulleys for Wire Rope-For Lifting
Use the bore to install these pulleys on a shaft. These pulleys are also called sheaves.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Nylon pulleys are much lighter than steel pulleys.
Warning: Never use to lift people or products over people.
Mounted Pulleys for Wire Rope-For Lifting
Install these pulleys to a flat surface.
Pulleys with two grooves are for use in applications where multiple pulleys move a single load, such as block and deal with systems.They can reduce the force needed to move the load by up to two times compared to single-groove pulleys.
Pulleys with a bearing are simpler to turn than pulleys with out a bearing.
Stainless pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never use to lift people or items over people.
Hanging Pulleys designed for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as for example block and deal with systems. They require about 50 % the push of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Style E pulleys have bracket upon the bottom that enables you to tie off a single end of your wire rope.
Warning: Never make use of to lift people or items over people.
Easy-Open Hanging Pulleys for Wire Rope-For Lifting
Also known as snatch blocks, these pulleys open therefore it’seasier to feed the rope through the housing-a totally free rope end isn’t needed.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as for example block and deal with systems. They require about half the push of a single-groove pulley to go the same load.
Latch kits (sold separately) put in a latch to the swiveling hook on Style C to maintain rope secure.
Warning: Never use to lift people or items over people
Hanging Pulleys meant for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are used in applications where multiple pulleys move an individual load, such as block and deal with systems. They can reduce the force had a need to move the strain by up to 2 times compared to single-groove pulleys.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Style A pulleys have a bracket on the bottom for tying off one end of a rope.
Warning: Never use to lift people or products over people.
Easy-Open up Hanging Pulleys for Rope-For Lifting
Also known as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a totally free rope end isn’t needed.
Warning: Never use to lift people or items over people.