Taper Adapter

The Taper Mount Direct Thread Adaptor offers a direct thread interface for taper mounted suppressors. Two units of wrench flats help to make it equally simple to attach or take away from the suppressor or your firearm’s muzzle threads. No proprietary tools needed. Obtainable in 1/2×28 and 5/8×24 with 18x1mm support just around the corner. While it is easy to have direct thread suppressor capacity that can move from host to host with no need for further muzzle gadgets, it is necessary to remember that each host firearm should be checked for baffle alignment via visible inspection before firing.

The 1/2×28 Insert can be used with cartriges up to 30 caliber and the 5/8×24 can be used up to .338 caliber.

The use of immediate thread adaptors boosts on immediate thread mounted suppressors, by allowing the end user to have modular thread pitches. One Taper Mount Suppressor to Rule ALL OF THEM.
Black Nitrided
1.5 Ounce Weight
Wrench Flats for each contingency
Taper Install Repeatability and Stability
Multi-Thread versatility for your Taper Install Suppressor
taper adapters allow the application of holders or equipment with a different machine-side taper then the machine spindle taper, such as for example using a BT40 tapping chuck on a 50-taper spindle.

These adapters eliminate lead time losses in case of a equipment Taper Adapter china breakdown. Adapters can also help in testing custom equipment on another machine compared to the planned production machine.

Taper adapters avoid the necessity for a supply of new holders or tools for a particular machine. They arrive ready to employ with built-in locked clamping mechanisms having a clamping screw on a ball bearing for steep taper clamping or HSK locking device for taper clamping.
The steep taper may be the standardised form of a tool taper for clamping tools in the main spindle of a machine tool
The steep taper is standardised in DIN 69871 part 1
No self-locking (in contrast with the Morse taper), thereby making tool alterations easier without clamping. That is particularly significant for computerized tool changes
Little clamping travel equals brief clamping time
High torsional rigidity due to the short distance between the leading edge and spindle bearing (brief overall length)
For adapting morse taper equipment to milling machines that take R8 tools
Alloy steel hardened to 50-52 rc
Critical surfaces precision ground
Use in R8 Machines
Turning Tools More taper reducing sleeve is utilized to convert your headstock from #2 MT to #1 MT. That is useful if you have a travel center or pen mandrel which is normally 1MT and your headstock is 2MT


Recent Posts