These worm equipment screw jacks are very precision and reliability, it can meet all the necessary basic safety, cost-efficiency, and toughness mandates of your application. High strength bronze worm gear can be used, the payloads from 0.5T to 100T . A total of 11 sizes are available, each in a journeying nut version and a basic version.
Worm gear drive screw jack
Translating(traveling screw) and rotating (traveling nut) configurations
Electric Worm Gear Jack powered Driven and Manual Operated both can be found
Trapezoidal spindle (self-locking) and Ball Screw spindle (high efficiency) version
Design option: Standard, Anti-rotation, Anti-backlash or Security nut
Standard and custom end fittings, installation options, and drive shaft
Worm Equipment Screw Jack systems are ruggedly designed and stated in standard versions with load managing capacities from 1/4 ton to 100 tons. They may be used individually or in multiple arrangements. There are no “standard” travel lengths and all Worm Gear Screw Jack systems are designed to specification.
The jack housings are made of ductile iron and proportioned to aid the rated capacity of the machine. MJ, 1/4 ton, and 1/2 ton models have light weight aluminum housings.
Each Worm Gear Screw Jack incorporates an alloy metal worm which drives a high strength bronze worm gear (drive sleeve). The worm shaft is supported on antifriction tapered roller bearings with exterior seals provided to avoid loss of lubrication (sealed radial bearings on the MJ, 1/4 , 1/2, and 1 ton systems). The drive sleeve is supported on antifriction tapered roller or ball thrust bearings. Rotation of the drive sleeve causes the lifting screw to translate or rotate, dependant on jack configuration.
The Inch and Metric Worm Gear Machine Screw Jacks incorporate an alloy or stainless steel worm which drives a high strength bronze worm gear (drive sleeve). The worm shaft is backed on anti-friction tapered roller bearings with external seals provided to prevent lack of lubrication. The drive sleeve is certainly supported on anti-friction tapered roller or ball thrust bearings. Rotation of the drive sleeve causes the thread lifting screw to translate or rotate, depending upon jack configuration.
The threads are precision formed, typically using Course 2-C (Centralizing) tolerances. Jack lift shaft lead tolerance is approximately ±0.004″ per foot.